中文 | English | 日本語
NS-MG
Location:Home > Products > NS-MG
 

World Leading Technology

Specifically for the magnesium alloy products, has multiple security device and can finish the process of removing the flashes of alloy casting parts despite of their complex stucture

Reducing the production cost

High production effectiveness

Simple operation

Not damage the surface quality of the products to improve the appearance quality.

High deflashing precision: Can remove very small and hidden flash.

Increasing the anti-oxidation ability of the treated surface of casting parts and can extend the using life of the products.

Covers less land: A automatic deflashing machine and its affiliated equipments only cover about 10m2 land.

High passing rate: The passing rate of finished products remains at about 98%.

 

Multiple Safety Devices

Automatic nitrogen injection system makes the level of oxygen of the deburring compartment below the explosion.

The equipment has a senor inside used to measure the oxygen content of the compartment to control the oxygen content.

The equipment has a safety relief impulsive mouth on the top, and the explosion-proof treatment has been conducted around the equipment.

All the material is high quality stainless steel.

The surface of the products treated by the automatic deflashing machine is more difficult to be oxidated than by manual, by mechanical polishing, as well as glass balls and steel balls. Observed under the microscope, the surface of products processed by the machine is homogeneous and has no traces of damage.

Attention: In the course of processing the magnesium casting parts, the oxygen content in the internal environment of the equipment must be less than 1.4%.

Home | About | Products | Tech Support | Process &Test center | Contact us
Showtan Techno-Machine Nanjing Co., Ltd Copyright Reserved ICP NO.:苏ICP备12027956号-1
Address:5th Zhuyuan Road (South) Yongning Industrial Concentration Zone, Pukou District, Nanjing 211801, PR of China